Bitaxe Touch Bitcoin Solo Miner (Turbo Touch Edition)

Description The Bitaxe Turbo Touch is the highest-hashrate open-source touchscreen Bitcoin miner available in 2026, delivering 2.15 TH/s on dual BM1370 ASIC chips with a 4.3-inch capacitive touchscreen and 8 dynamic displays. Live hashrate, Bitcoin price, block height, latest blocks, and full mining controls are available, all at the tap of a finger. The Bitaxe Turbo Touch operates on open-source firmware you fully control. Whisper quiet, approximately and ready to mine in under 5 minutes out of the box. Every unit assembled 100% in the USA and shipped same day from Houston, Texas by Solo Satoshi. Every unit is bench tested and verified before shipping. New to Bitaxe? Follow our step-by-step Bitaxe Turbo Touch setup guide to get mining in under 5 minutes. Bitaxe Turbo Touch Key Features 2.15 TH/s default hashrate (3.06 TH/s overclocked at 750 MHz / 1200 mV). 3 built-in performance modes: Low (2.34 TH/s at ~41W), Medium (2.44 TH/s at ~45W), High (2.67 TH/s at ~48W). Dual BM1370 ASIC chips from the Bitmain Antminer S21 Pro. 4.3″ 800×480 capacitive touchscreen with 8 dynamic screens. ~17 J/TH efficiency at ~43W power draw. ~35 dB noise level (at default settings), whisper quiet for desk, office, or nightstand. Dual-side honeycomb vents for pass-through cooling. Open-source firmware AxeOS (esp-miner) BAP-GT-TOUCH (screen). 12V DC power via XT30 connector (included). Wi-Fi 2.4 GHz (ESP32-S3), browser-accessible AxeOS dashboard. 100% assembled in the USA from bare PCB. 90-day Solo Satoshi warranty. Bitaxe Turbo Touch Specifications Specification Details Platform Bitaxe GT 801 ASIC Chips 2x BM1370 (Antminer S21 Pro silicon) Hashrate (Default) 2.15 TH/s ( /-10%) Hashrate (Overclocked) 3.06 TH/s at 750 MHz / 1200 mV Performance Modes Low (2.34 TH/s at ~41W), Medium (2.44 TH/s at ~45W), High (2.67 TH/s at ~48W) Power Draw ~43 W ( /-10%) Efficiency ~17 J/TH ( /-10%) Display 4.3″ 800×480 LCD, capacitive touch Dynamic Screen Count 8 Mining Firmware AxeOS esp-miner (open-source mainline) Screen Firmware BAP-GT-TOUCH (open source, via BAP port) Power Input XT30 male connector (12V DC) Connectivity Wi-Fi 2.4 GHz (ESP32-S3) Cooling 60mm aluminum heatsink 60mm ultra-quiet fan Noise Level ~35 dB Enclosure 3D-printed with dual-side honeycomb vents, rubber feet Dimensions 4.750 x 3.5 x 3.0625 in (L x W x H) Weight 1.2 lbs Firmware Updates AxeOS WebUI, USB-C (Bitaxe Webflasher), screen OTA via touchscreen Assembly 100% assembled in the USA Warranty 90-day Solo Satoshi warranty Running cost: approximately $3.70/month at $0.12/kWh or $5.50/month at $0.18/kWh. Calculate your exact cost here. 8 Dynamic Displays at the Touch of Your Finger Tap through 8 dedicated screens directly on the 4.3″ display. Every screen pulls live data from the hardware or from mempool.space. Mining Dashboard: Live hashrate, wattage, ASIC temp, best difficulty, accepted/rejected shares. Block Clock: Current Bitcoin block height, live from mempool.space. Latest Blocks: Last 8 mined blocks with fees, transaction counts, and pool attributions. Clock: 12-hour digital clock with all time zones. BTC Price Ticker: Live Bitcoin price in USD from mempool.space. Wi-Fi Settings: Network scan, password entry, signal strength, IP address display. Settings: Three performance modes (Low: 2.34 TH/s at ~41W, Medium: 2.44 TH/s at ~45W, High: 2.67 TH/s at ~48W), automatic or manual fan control, screen brightness (5-100%), time zone selection, and screen firmware updates. Hashrate Graph: Live hashrate performance over time. See the full breakdown of the Bitaxe Turbo Touch here How Does the Bitaxe Turbo Touch Compare to the Competition? Hashrate comparison: the Bitaxe Turbo Touch delivers 2.15 TH/s for $325, more than double any single-chip Bitaxe Touch or BMM 101 on the market in 2026. All specs at default settings. Verified March 2026 by solosatoshi.com. Cost per terahash comparison: the Bitaxe Turbo Touch delivers the best value at $151/TH, less than half the cost per terahash of any competing touchscreen Bitcoin miner in 2026. All specs at default settings. Verified March 2026 by solosatoshi.com. What’s in the Box? 1x Bitaxe Turbo Touch (GT 801 platform, fully assembled). Quick start card. Holographic sticker sheet. 12.4V 10A (124W) XT30 power supply with choice of North America, EU, UK, or AU plug. Everything you need to start mining in under 5 minutes. Connect power, tap Wi-Fi on the touchscreen, enter your Bitcoin address in AxeOS, and start hashing. Follow the full Bitaxe Turbo Touch setup guide here. Why Buy the Bitaxe Turbo Touch From Solo Satoshi? Same-day shipping on orders placed before 12 PM CST. 90-day warranty. Most competitors offer 0 to 30 days. 100% USA assembly from bare PCB. Not a rebadged import. Verified seller on bitaxe.org since 2024. 40,000 devices shipped to 70 countries. 400 verified 5-star reviews. Proven customer block wins with on-chain proof. View the open-source firmware on GitHub. View the open-source hardware on GitHub. Read the full Bitaxe Turbo Touch guide | Browse all Bitaxe miners | How to start Bitcoin mining .faq-question { color: #000000; }.faq-question { background-color: #333333; }.faq-question:hover { background-color: #000000; }