WiFi Module DT 06

Description of WiFi Module DT 06 The WiFi Module DT 06 is a high-performance TTL-to-WiFi module developed on the ESP-M2 platform. It integrates a 32-bit Tensilica L106 processor, Wi-Fi transceiver, and memory, supporting real-time serial data transmission over WiFi. Operating in the 2.4 GHz ISM band with 802.11 b/g/n protocols, it provides stable, low-power, and cost-effective wireless connectivity. The WiFi Module DT 06 features optimized firmware for high-speed serial communication, with advanced reconnection mechanisms in WiFi STA and TCP Client modes for stable, uninterrupted data transmission. Supporting IEEE802.11 b/g/n/e/i and a full TCP/IP stack, it can add WiFi functionality to existing devices or act as an independent network controller, offering versatile connectivity at a competitive price. Specification  Type Item Parameters Wi-Fi Frequency 2.4G ~ 2.5G (2400M ~ 2483.5M) Transmit power 802.11b: 20 dBm 802.11g: 17 dBm 802.11n: 14 dBm Receiving sensitivity 802.11b: -91 dBm (11Mbps) 802.11g: -75 dBm (54Mbps) 802.11n: -72 dBm (MCS7) Antenna PCB onboard antenna Hardware   CPU Tensilica L106 32-bit MCU Peripheral UART / EN / STATE Working voltage 3.3V Working current Average current: 80 mA Working temperature -40°C ~ 125°C Environment Temperature -40°C ~ 125°C Size 34 mm × 17 mm × 4 mm Pinout Diagram Num Pin Name Type Description / Function 1 STATE I/O Indicates the Wi-Fi connection status (Connected / Disconnected). Typically used for an LED or as an input to an MCU. 2 RXD I/O Receives serial data. Used for programming, AT commands, or sending data from an MCU. 3 TXD I/O Sends serial data. Used for debugging or communication with an MCU. 4 GND Power Ground pin. Must be connected to the power supply and MCU GND. 5 VCC Power 3.3V DC power input. 5V should not be applied directly. 6 EN (CH_PD) Control Enables or disables the module. HIGH (3.3V) turns it on, LOW turns it off. Power Supply and Consumption The module operates within a voltage range of 3.0V to 3.6V, making it compatible with standard 3.3V logic systems. It draws approximately 160 mA during active transmission and less than 10 µA in deep sleep mode, enabling long battery life in low-power applications such as wireless sensors or wearable devices. Efficient power management features allow developers to optimize energy usage through sleep modes, dynamic clock scaling, and peripheral control. Configuration Interface The DT-06 module includes a built-in HTTP web server for parameter configuration. Factory default: AP mode with hotspot named “Doit_WiFi_xxxxxx” (last six digits = MAC address). Connect via PC, smartphone, or tablet (Android, iOS, Windows Phone supported). Hotspot has no password by default. Supports setting SSID, password, IP, subnet, automatic scanning of nearby WiFi networks, and DHCP configuration. Application Serial Transparent transmission. Smart power plug/Smart LED light. Sensor networks. Wearable electronics. Securit ID label. Wireless location recognition. Wireless location system beacon. WiFi prober. Mesh networks. Industrial wireless control. Package Contents 1 × WiFi Module DT 06 Warranty and Replacement TechShopBD offers up to one year of warranty and replacement support for its products, depending on the supplier(s) and product(s). The specific warranty duration for each product can be found on the respective product page. To be eligible for warranty and replacement support, customers must agree to our terms and conditions. Attention Note: This item is non-returnable. If this item arrives damaged or is not functioning properly, please don’t hesitate to contact us to determine if further action is required. Need Help? Our engineers are available to assist you. If you have any queries, please leave a comment below or call 09678110110 from 09:00 am to 06:00 pm (7 days a week). You can also reach us via WhatsApp or Facebook Inbox