Charnwood B350P 14” Premium Woodworking Bandsaw Package DealB350 Bandsaw Package: Save £47.00B350 BandsawBB32 Woodpecker Blade 2560mm x 6mm(1/4″)x 6tpiBB33 Woodpecker Blade 2560mmx10mm (3/8″) x 6tpiBB36 Woodpecker Blade 2560mm x 20mm(3/4″) x 4tpiW522 Wheel Base Premium Grade 14” Woodworking Bandsaw9” Cutting Depth Capacity14” Cutting Width (Throat)Supplied with High Quality British Made BladePrecision Ground Cast Iron Work TableQuick Action Locking On Rip FenceCrosscutting Mitre Guide IncludedQuiet Induction MotorMains Powered LED work LightIntegral Dust Collection TrayIncludes Floor StandPrimarily used for WoodworkingThe bigger brother of the B300, this floorstanding woodworking bandsaw has a cutting capacity of 230mm (9″), to satisfy professional workshops. The power is delivered by a quiet induction motor with a belt drive to the bandsaw wheel. A two speed pulley allows the correct blade speed to be selected, depending on the hardness of the material being cut. The key to straight and accurate cutting on a bandsaw is to have a good set of blade guides. The B350 has three bearings on the blade guard. Two sealed bearings mounted side-on to the blade, control blade twist and keep it true. The rear bearing takes the thrust of the back of the blade allowing it to run freely. The same setup is then repeated beneath the table.The cast iron table tilts from 90 degrees to 45 degrees, on a rack & pinion, and has a positive stop at both of those positions. Any angle in between can be read off the scale and locked in. For rip cuts the guide fence can be situated on either side of the blade, can be locked into position with a single press of the lever and has a clear marker to set against the metric scale. The fence itself can be fitted in two ways. When cutting thicker material the full face height of 60mm is used. When cutting thin and narrow strips the fence is fitted with the small face, against the blade to allow clearance around the guides. The bandsaw is fitted with a main powered LED work light on a flexible stem, so that the work area will always be well lit.The two doors are fitted with safety locks which cut power to the motor when the doors are open for blade changing or cleaning.Tensioning the blade correctly is made simple thanks to the features on this premium model. A blade tension lever quickly sets the tension. After a blade change fine tuning can be carried out with the aid of a tension indicator and scale. The required tension varies according to blade width. A window in the top door allows the operator to confirm blade tension is correct and make an adjustment when necessary.A dust extractor is always recommended when using a bandsaw. The dust collection outlet has 3 rings which allow it to accept 3 sizes of hose, 50mm, 75mm & 100mm diameter making it compatible with any type of extraction system. If extraction is not being used however, the bandsaw is fitted with an integral dust collection draw. Dust falling into the base of the machine will be collected here, allowing it to be quickly and easily emptied.Supplied with 1/2” x 4tpi blade, rip fence, mitre fence, work light, floorstand, 2.0m power cable and UK 3 pin plug.This Bandsaw is fitted with a High Quality, British manufactured blade with precision ground teeth for incredible cutting results.Charnwood B350 SpecificationMaximum cutting depth225mm (9″)Throat width340mm (14″)Max. cutting width with fence215mm Left / 215mm RightTable size545mm x 515mmTable Height1020mmTable tilt0-45 degreesMitre Guide T-Slot (x2)16mm / 20mmCutting speed800 & 370m/minMotor (induction)1100w (1.1/2hp)Blade length2560mmBlade widths6-25mm (1/4″ – 1″)Dimensions (WxDxH)900mm x 720mm x 1720mmWeight76KgAssembly Time Required 60 Minutes (Needs 2 People)Rating Light TradeProduct Guarantee5 YearsW522 Universal Wheel BaseUniversal Wheel Kit with wide pedal design and heavy weight capacity.Constantly having to push one machine to the back of the workshop to make space to bring another one forward?Convert your machines into portable units by adding this highly adaptable wheel base. There are two fixed wheels and two steering wheels allowing excellent manoeuvring across a relatively flat floor surface. Step on the two foot plates to lower the wheels for moving the machine, then raise the two foot plates to lower the base back onto the adjustable rubber feet.The base can be assembled either as a square shape or a rectangle shape to suit the footprint of the machine being mounted.It can be used with a huge variety of machines including Planer Thicknessers, Table Saws, Bandsaws, Spindle Moulders and Lathes.Charnwood W522 SpecificationMinimum square size340mm x 340mmMaximum square size930mm x 930mmMaximum rectangle size520mm x 1340mmMaximum weight load295kgAssembly Time Required20 MinutesRatingLight tradeProduct Guarantee1 YearThis item can only Be delivered to mainland Uk, If ordered outwidth of mainland UK, A refund will be issued.You can see ore bandsaws HERE
