37mm 12V 24V Mini DC Geared Motor with Encoder NFP-JGB37-3530-EN

High Torque DC Gear Motor with Encoder Data Sheet Micro DC Gear with Encoder: Metal Gear, D-shade Output Shaft, Premium 100% Pure Copper Coil, High Strength Magnetic Strip. Model NFP-JGB37-3530-EN Rated Voltage 12V / 24V DC No-load Speed 12rpm – 1,600rpm No-load Current 0.08A / 0.18A Max Torque 35kg.cm Power 14.4W Rotation CW / CCW Shaft Diameter 6mm Weight appr. 200g   Model: NFP-JGB37-3530-EN-12100, 12V DC, motor without gearbox 10,000rpm Ratio No-load Speed No-load Current Rated Speed Rated Current Rated Torque Stall Torque Stall Current 6.25:1 1,600rpm 0.18A 1,231rpm 1.2A 0.45kg.cm 1.8kg.cm 4.3A 10:1 1,000rpm 0.18A 769rpm 1.2A 0.72kg.cm 2.88kg.cm 4.3A 18.8:1 533rpm 0.18A 410rpm 1.2A 1.3kg.cm 5.2kg.cm 4.3A 30:1 333rpm 0.18A 256rpm 1.2A 2kg.cm 8kg.cm 4.3A 56:1 178rpm 0.18A 137rpm 1.2A 3.4kg.cm 13.6kg.cm 4.3A 70:1 142rpm 0.18A 111rpm 1.2A 4.3kg.cm 17.2kg.cm 4.3A 90:1 111rpm 0.18A 85rpm 1.2A 5.5kg.cm 22kg.cm 4.3A 131:1 76rpm 0.18A 59rpm 1.2A 7.3kg.cm 29.2kg.cm 4.3A 169:1 59rpm 0.18A 46rpm 1.2A 9.4kg.cm 37.6kg.cm 4.3A 210:1 47rpm 0.18A 37rpm 1.2A 11.7kg.cm 46.8kg.cm 4.3A 270:1 37rpm 0.18A 28rpm 1.2A 15kg.cm 60kg.cm 4.3A 394:1 25rpm 0.18A 20rpm 1.2A 19.8kg.cm 79.2kg.cm 4.3A 506:1 20rpm 0.18A 15rpm 1.2A 25.4kg.cm 101.6kg.cm 4.3A 630:1 15rpm 0.18A 12rpm 1.2A 31kg.cm 124kg.cm 4.3A 810:1 12rpm 0.18A 10rpm 1.2A 35kg.cm 140kg.cm 4.3A Note: all reduced no-load speeds have a tolerance of ±15%.   Model: NFP-JGB37-3530-EN-24100, 24V DC, motor without gearbox 10,000rpm Ratio No-load Speed No-load Current Rated Speed Rated Current Rated Torque Stall Torque Stall Current 6.25:1 1,600rpm 0.08A 1,231rpm 0.63A 0.5kg.cm 2kg.cm 3A 10:1 1,000rpm 0.08A 769rpm 0.63A 0.8kg.cm 3.2kg.cm 3A 18.8:1 533rpm 0.08A 410rpm 0.63A 1.3kg.cm 5.2kg.cm 3A 30:1 333rpm 0.08A 256rpm 0.63A 2kg.cm 8kg.cm 3A 56:1 178rpm 0.08A 137rpm 0.63A 3.6kg.cm 14.4kg.cm 3A 70:1 142rpm 0.08A 111rpm 0.63A 4.5kg.cm 18kg.cm 3A 90:1 111rpm 0.08A 85rpm 0.63A 5.8kg.cm 23.2kg.cm 3A 131:1 76rpm 0.08A 59rpm 0.63A 7.7kg.cm 30.8kg.cm 3A 169:1 59rpm 0.08A 46rpm 0.63A 9.9kg.cm 39.6kg.cm 3A 210:1 47rpm 0.08A 37rpm 0.63A 12.3kg.cm 49.2kg.cm 3A 270:1 37rpm 0.08A 28rpm 0.63A 15.9kg.cm 63.6kg.cm 3A 394:1 25rpm 0.08A 20rpm 0.63A 20.8kg.cm 83.2kg.cm 3A 506:1 20rpm 0.08A 15rpm 0.63A 26.8kg.cm 107.2kg.cm 3A 630:1 15rpm 0.08A 12rpm 0.63A 33kg.cm 132kg.cm 3A 810:1 12rpm 0.08A 10rpm 0.63A 35kg.cm 140kg.cm 3A Motor is forbidden to be locked Note: all reduced no-load speeds have a tolerance of ±15%.   Low Noise Miniature DC Gear Motor Outline Drawing Characteristics: Squelch, High Torque, Long Lifetime, High Performance Low Cost. Wire Instructions for High Power Gear Motor Encoder ��Red Wire: Motor power supply ⚫️Black Wire: Motor power supply – ��Green Wire: Sensor ground wire ��Blue Wire: Sensor power supply ��Yellow Wire: Signal A output point ⚪️White Wire: Signal B output point Encoder Type AB Dual-phase Incremental Magnetic Hall Encoder Line Speed Basic Pulse 16PPR x Gear Reduction Ratio Supply Voltage 3.3V / 5V DC Basic Function Built-in pull-up shaping resistor, direct connection to MCU Interface Type XH2.54 (standard connection cable) Output Signal Type Square Wave AB Phase Response Frequency 100KHz Base Pulse Count 16PPR Magnetic Ring Trigger Pole Number 32 Poles (16 Pairs) Keywords: high torque geared dc motor, speed reduction motor, 37mm gear motor